Magnetic Pulser Coil BBMPulser 2 Part Handle. 3.9 Tesla+

Description

Magnetic Pulser Coil BBMPluser 2 Part Handle. You can get 4 Tesla and more (40,000 Gauss +) from this coil. Condition is "New". Shipped with USPS Priority Mail.
BBMPulser brand. website www.bbmpulser.org
Here is the link where this coil being tested on BBMPulser 6S Unit
https://youtu.be/5W4xjqFSIDI
https://youtu.be/-KXwPnkkVqI
Coil made of 14AWG Copper Magnet wire.
15 Layers
ID - 1"
OD - 3"
5/8" thick
Coil is filled with the Flex it 90 resin inside between layers and windings making it very quiet while operating at high power (4Tesla and Up)
The coil is so quiet, that you can place it directly over your ear and pulse at 4 Tesla and you wont have ringing in your ears from the clicks, You will defiantly fill it, but as fur as clicking noice - it's pretty low.
Handle is made using 2 different resins, handle itself is made of hard white plastic,  semi-clear rubber resent around the coil is made of Flex-it 90, its hard but has slightly rubber to it, allows expansion of the coil when it gets hot.
You will have total 4 wires for connection:
1x12 AWG pair - 5.5' long wires for coil
1x18 AWG pair - 5.5' long wires for thermal switch and South Pole LED Indicator
So this Coil has build in thermal switch and build in South Pole LED indicator.
You don't have to use it (this build in thermal safety) but its recommended, it's very easy to implement.
Build in 50C thermal switch, it's slightly offset to trigger when coil gets hot around 85-90C and automatically resets back when coil cools off ~ 80%.
You will get picture with wiring diagram showing how it's wired inside.
Also you will get my support via Email
your tech Andrey D